Thanks for looking,

John

She fell in love with it and ordered one .

I started out cleaning up this teapot, sanded, ruffed it up a bit to prepare it to take a white primer and paint. Before that I removed the finial on top of the lid, drilled a hole, marked the bottom where I would drill the hole for the threaded hollow rod to go thru all the way to the top. I secured the threaded hollow rod with washers and nuts.

After primer and paint where dry, I then cut up vintage bone china plate rims with my tile nippers, added stained glass pieces which were also cut over and over again until the fit to the curved body just right and glue them to the body with thin set.

There, one side done, proceeded to the other side, and partially the bottom, and stained glass around the rim. One can see part of the teapot that is not mosaiced yet, just the white paint. The thin set needs to dry for quite some time before I can go on to the grouting of the entire teapot body.

After usually at least a week the mosaic on the teapot is ready for grouting. The grout just has to be the right consistence to get into all the nooks and cranny’s. I let it sit for about an hour until I wipe the grout overflow of the teapot body with a wet sponge. Then it will sit again for a while until I wipe the grout film of the stained glass and fine bone china pieces cut from plate rims to make everything shiny. I wait a few more days normally before I seal this mosaic on the teapot body with a tile sealer. My client needed this in a hurry for a gift so I sped up some of the process a bit to help her out, by using a hair dryer.

Here we go all done so far…

The lid was then covered in thin set and glue to build it up a bit, I then set in all the clay roses, vintage rhinestone brooches, cameos, pretties and baubles which would dry within the thin set/glue and be secured.
In the meantime I made the lamp shade, finished it up with tear drop pearl trim and an old fashioned Rhinestone Earring. I threaded the electrical cord thru the hollow metal rod and connected the cord to the actual light kit and mounted it on the top of the hollow rod. Put a light bulb in, yep it works, all good….Topped of the spout with a Crystal Chnadelier Tear Drop and a Rose.

Here is the finished project and my client was very happy, which in turn pleased me and made me happy.

Handmade Teapot Lamp Decor, formerly silver plated. An exquisite presentation, loved previously – to remain now a treasure for the next 50 years in your home perhaps?

I sanded, primed and painted this teapot in a cottage white color and then sealed it. This timeless classic, I then adorned the lid with handmade clay roses, vintage antique Jewelry and bling, meticulously laid on this teapot. The handmade clay roses and leaves I arranged so to give the impression they are climbing from the lid. A chandelier Prism hangs gracefully from the spout accompanied by a lil rose.
A classic Cameo, who you might usually find on a sweaters and blouses, settles on the lid and some on the belly of this Teapot.
I am quite pleased with the outcome of this reclaimed Teapot.
An abundance of Shabby, Cottage Chic… A treasure for a Victorian, beach, cottage, shabby, Paris home or Apartment.
I do accept custom orders, please contact me.

Mosaic Art by Myeuropeantouch

The twisted wire was formed into the basic shape, then the top was wrapped with 21 gauge half round Argentium sterling silver wire to form the bail.  A precast head was soldered into the loop with hard silver solder.  The entire piece was then pickled, hand polished and tumbled to a high gloss polish.  The prongs were notched with a square fine file, and the peridot was set into the silver setting.  We have a finished pendant:

These last to views are from the back and the extreme left side.  Overall, the effect of the twisted wire accents the entire design.

This chunky aquarium focal bead featuring pretty little Tang tropical fish murrini

And a set of funky rainbow twisties

The winner will be drawn from the names of FHFteam blog followers who comment on the team blog during January, so don’t forget to ‘Follow’ us, and start sharing what’s on your mind! Drawing for the prize will take place on the 8th of February 2012

I’d like to say a special thank you to Andrew and Kimberly for inviting me to have a guest blog spot here to tell you all about our giveaway. Their tireless support of handmade it truly inspirational.

Happy New Year
Jo x
Kitzbitz on Etsy, Kitzbitz on HAFshop, Frit N Chips.

Can you Believe it's a Jewlelry box?

Where do you keep these pieces of adornment?  Do you have a jewelry box?  Do you spend a lot of time and money on jewelry only to have it all over the house?  Perhaps, the top of your dresser is loaded with these treasures and trinkets.  “No, I have a jewelry box,” you say in protest.  But let’s be honest, is it organized?  Is it just as nice as your jewelry?  Was it handed down from your great-grandmother or your grandmother?  Is it as great an heirloom as some of your pieces of jewelry?  Is the quality worthy of your treasures?  I pose all these questions because I know a secret– handmade jewelry boxes!  “So what?” you ask.  Here’s the “so what.” These aren’t just any jewelry boxes.  Read on…

Nestled in Cincinnati, Ohio is RDC (Ramon Design Concepts) Woodworking.   Ramon is the artist who creates these wooden jewelry fortresses.  The boxes are exquisite, unique, exotic and some are just downright cute!  There is nothing typical about RDC’s jewelry boxes.  The designs are mind-blowing and the only thing you can say is WOW!  How did he do that?

The Zebra Jewelry Box

The first jewelry box that was sold was made of tiger wood.  The customer was so excited, she looked at her granddaughter and said, “You can help me take my jewelry out of the plastic bags and put them in my new jewelry box!”  I cringed at the words “plastic bags.”  However, I applauded the customer for the serious upgrade.

I doubt if the little girl knew that one day she may own that same jewelry box.   It will have monetary value and a sentimental value that will be priceless.  That little girl will have fond memories of helping her grandmother to place treasures of adornment in a little tiger striped box that brought so much joy.

This is called Queen of the Nile

That’s the aim of RDC’s creations.  We design and create works of art that are functional, beautiful, and intended to become heirlooms that will be proudly passed down with sweet stories and precious memories from generation to generation.  Most of all, these wooden beauties are one-of-a-kind.  So the little girl in this story will have a jewelry box as unique as her memories.

Classic Charm and sophistication! Perfect Wedding day and everyday selections flaunting signature woven pearl style, over-the top design, rhinestone brooches, and fabulous beading…wow factor indeed! Every piece has a story and as you embark on this journey why not participate with such Broochaliscious style…besides, your neck is just too hungry to pass these up! Total Accessorization and timeless style and design. ZiLLA’s QuEeN brings you Wedding Delights & much much more!

Charmed,
ZiLLA’s QuEeN

Shop: www.ZiLLAsQuEeN.Etsy.com
FB: ZiLLA’s QuEeN
Twitter: https://twitter.com/#!/ZiLLAsQuEeN

In order to create my art, I first cut the stone that will go in the piece, then design around that.  Here are two stones cut in the lapidary in the past week.  The first is a piece of Lapis Lazuli about 2.5 inches long and it is very heavy.  Will probably use it in a horizontal position in a necklace.  Way too large for a ring.

The second is a free form cabochon made with “Pudding” jasper.  Feel free to change the adjective ‘dding’ to anything that you think describes the stone.

I will wait, but am currently working on a mixed metal pendant (gold and silver) with a highly included rutilated quartz *16 mm round faceted stone.  Another project is a ring to ask Debbie to marry me “again” next October on our anniversary. A friend is cutting this as I certainly can not do it in my shop.  Any way, that is the news so far for the day after Thanksgiving.

John