She fell in love with it and ordered one .

I started out cleaning up this teapot, sanded, ruffed it up a bit to prepare it to take a white primer and paint. Before that I removed the finial on top of the lid, drilled a hole, marked the bottom where I would drill the hole for the threaded hollow rod to go thru all the way to the top. I secured the threaded hollow rod with washers and nuts.

After primer and paint where dry, I then cut up vintage bone china plate rims with my tile nippers, added stained glass pieces which were also cut over and over again until the fit to the curved body just right and glue them to the body with thin set.

There, one side done, proceeded to the other side, and partially the bottom, and stained glass around the rim. One can see part of the teapot that is not mosaiced yet, just the white paint. The thin set needs to dry for quite some time before I can go on to the grouting of the entire teapot body.

After usually at least a week the mosaic on the teapot is ready for grouting. The grout just has to be the right consistence to get into all the nooks and cranny’s. I let it sit for about an hour until I wipe the grout overflow of the teapot body with a wet sponge. Then it will sit again for a while until I wipe the grout film of the stained glass and fine bone china pieces cut from plate rims to make everything shiny. I wait a few more days normally before I seal this mosaic on the teapot body with a tile sealer. My client needed this in a hurry for a gift so I sped up some of the process a bit to help her out, by using a hair dryer.

Here we go all done so far…

The lid was then covered in thin set and glue to build it up a bit, I then set in all the clay roses, vintage rhinestone brooches, cameos, pretties and baubles which would dry within the thin set/glue and be secured.
In the meantime I made the lamp shade, finished it up with tear drop pearl trim and an old fashioned Rhinestone Earring. I threaded the electrical cord thru the hollow metal rod and connected the cord to the actual light kit and mounted it on the top of the hollow rod. Put a light bulb in, yep it works, all good….Topped of the spout with a Crystal Chnadelier Tear Drop and a Rose.

Here is the finished project and my client was very happy, which in turn pleased me and made me happy.

Handmade Teapot Lamp Decor, formerly silver plated. An exquisite presentation, loved previously – to remain now a treasure for the next 50 years in your home perhaps?

I sanded, primed and painted this teapot in a cottage white color and then sealed it. This timeless classic, I then adorned the lid with handmade clay roses, vintage antique Jewelry and bling, meticulously laid on this teapot. The handmade clay roses and leaves I arranged so to give the impression they are climbing from the lid. A chandelier Prism hangs gracefully from the spout accompanied by a lil rose.
A classic Cameo, who you might usually find on a sweaters and blouses, settles on the lid and some on the belly of this Teapot.
I am quite pleased with the outcome of this reclaimed Teapot.
An abundance of Shabby, Cottage Chic… A treasure for a Victorian, beach, cottage, shabby, Paris home or Apartment.
I do accept custom orders, please contact me.

Mosaic Art by Myeuropeantouch

There is nothing wrong with the materials in my scrap bowl, I frequently pull bits and pieces and recycle them as part of new work. But when I throw a new creation in there I feel I failed to achieve my goal for this day.

Today I got a wonderful surprise with great potential:) I see a few places to tweak and polish before I add it to my listings but I am very pleased, what do you think? This piece is reversible,I would wear it either direction. This is a freeform piece of silky polished moonstone with a sweet peachy pink color and fabulous luster not showing in my photos. This will look great on a leather cord with one of my hand wrapped forged clasps. Watch for it to appear soon in my Handmade shop NancysWildWire

Thanks for your interest:)

Back view Do you like my doodles?

My doodles

This chunky aquarium focal bead featuring pretty little Tang tropical fish murrini

And a set of funky rainbow twisties

The winner will be drawn from the names of FHFteam blog followers who comment on the team blog during January, so don’t forget to ‘Follow’ us, and start sharing what’s on your mind! Drawing for the prize will take place on the 8th of February 2012

I’d like to say a special thank you to Andrew and Kimberly for inviting me to have a guest blog spot here to tell you all about our giveaway. Their tireless support of handmade it truly inspirational.

Happy New Year
Jo x
Kitzbitz on Etsy, Kitzbitz on HAFshop, Frit N Chips.

One of the things that make handmade jewelry so appealing is that no two pieces are ever identical. Even if you purchase a piece that has been made several times, it will still be different from the others like it simply because you cannot exactly duplicate handmade design.

In addition, many people who create handmade jewelry opt for pieces that are less common than what is traditionally worn. This allows those wearing the jewelry to create a look that is individual to them and will never end up being just another part of the crowd.

Handmade jewelry is also popular because it is often so affordable. Where some pieces may cost an enormous amount, handmade jewelry is often considered to be less expensive. You are paying for the materials and the person’s time creating a one-of-a-kind piece and that is appealing to many.

The simple fact is that there are plenty of reasons to love handmade jewelry. Whether it be the look or the cost, you are certain to find your own reason to love it.

As with many places, Debora and I tend to work in spurts of creativity.  She will look at her beads and wire over and over.  Then she will see a way to put together a piece.  In the past week, she has made several beautiful pieces of wearable art.  Here are two of her creations (as thumbnails), the first features a seahorse pendant “under the sea.”  The second I called a “Gypsy” necklace due to the pattern on the beads. I had a clasp that would go with the beads. 

Every time that she produces, I have the honor of adding the clasps and chain to her creations trying to maintain her vision.  In between, I try to do a little creating of my own.  My last pieces have been made with copper.  I had cut some cabochons and was trying to think of some special way of making something with them other that wire wrapping or bezel setting.  I saw a piece that Laura Bracken (in California) had made using resin in a frame of wire wrapping.  Applying that simple idea, I made a copper piece (textured, dapped and patinated) then set the cabochons in the bowl that I had made (30 by 40 mm oval) and filled up part of the bowl with clear resin.  The second piece shown here is a copper and turquoise chip “Tree of Life.”  The ring is 12 gauge soft round wire, the solder join is hidden in the base of the tree.  We will be continuing our creation of wearable art.

I am learning the ropes as far as computers and selling online… and let me just say that I have come across so many fantastic ladies… that are “covering my back ” so to speak… they are helpful.. knowledgeable… kind… considerate… looking out for others…

Yes, no doubt there are some that are strictly attending to their own agenda… but to be quite honest … I have yet to meet such a person…. there is a spirit of camaraderie… caring… support… “we’re all in this together” kind of feel… women banding together supporting other women… something that I do believe comes so naturally… we are the nurturers… the caregivers… and caretakers… we are multi taskers… we go the extra mile with never a thought… or complaint about it… we give.. we love.. we care…

With the season of Christmas fast approaching …. a time of giving … may I just say ” thank you ” to all you fabulous ladies… the list is far too long and wide… but you know who you are… keep on doing what you do best… Share the L ~ O ~ V ~ E…. hugz… Kat….. http://katstreasureshop.etsy.com/

JR Aquamarine Pendant

Freeform cabochon aquamarine weighing 43 carats in a Sterling silver wire frame accented with glass beads.  The pendant is about 3 inches high

Also did some playing with copper wire, here is that resulting bracelet:

AK Woven Copper Bracelet

12 gauge dead soft round copper wire woven into this 8 inch  cuff bracelet.  After weaving the three wires the bracelet was flattened with hammer and anvil to make a single thickness presentation.

Everyone have a great Thanksgiving.

John